Industrial Electrical Safety Inspections
Untitled Document

 

 

January 22, 2014

OSHA concluded that effective management of worker safety and health protection is a decisive factor in reducing the extent and the severity of work-related injuries. Electrical safety inspections must be conducted in order to verify full compliance with OSHA and NFPA electrical safety regulations and standards.

This live webcast will provide guidelines for developing an electrical safety inspection program. The inspection program should be carried out by a knowledgeable, qualified person in order to identify deficiencies in electrical equipment or systems and to correct, or properly document, any deficiencies found. One way to ensure that the inspection program is on target is to have electrically qualified company safety personnel conduct the inspections. The written electrical safety inspection program should be reviewed on a periodic basis, by qualified persons, to ensure that the check-lists and procedures are current and are being utilized. Inspections should include a review of the entire electrical safe work program for energized and deenergized work.

 

Deliverables

  • Live webcast with 60 DAY access to archived recording for ANYTIME/ANYWHERE viewing
  • Slides from the session
  • 0.2 CEUs

 

 

This event is sponsored by Westex. Click here for a variety of videos from Westex related to Arc Flash hazards.

 

Webinar Pricing

  • Member Price: $95.00
  • AIHA/ACHMM Price: $105.00 (PLEASE NOTE: When registering online, you must enter the following coupon code AIHA1911 for a $10.00 discount. Register online as a "Non-Member" and enter this coupon code into the field for "Registration Discount Code".)
  • List Price: $115.00

 

Speaker Information

Dennis K. Neitzel, CPE (Certified Plant Engineer), AVO Training Institute, Inc., Dallas, TX

 

Dennis K. Neitzel, CPE, Director Emeritus, AVO Training Institute, Inc., Dallas, Texas. Mr. Neitzel is an active member of the Institute of Electrical and Electronics Engineers (IEEE-Senior Member), the American Society of Safety Engineers (ASSE), the Association for Facilities Engineering (AFE), the International Association of Electrical Inspectors (IAEI), and the National Fire Protection Association (NFPA). He is a Certified Plant Engineer (CPE) and a Certified Electrical Inspector-General; Principle Committee Member and Special Expert for the NFPA 70E, Standard for Electrical Safety in the Workplace; serves on the Defense Safety Oversight Council - Electrical Safety Working Group for the U.S. Department of Defense Electrical Safety Special Interest Initiative; serves as Working Group Chairman for the revision and reorganization of IEEE Std. 902 (The Yellow Book), IEEE Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems (changed to IEEE 3007.1, 3007.2, & 3007.3); serves as Working Group Chairman of IEEE P45.5 Recommended Practice for Electrical Installations on Shipboard - Safety Considerations; and is co-author of the Electrical Safety Handbook, McGraw-Hill Publishers. He earned his Bachelor's degree in Electrical Engineering Management and his Master's degree in Electrical Engineering Applied Sciences. Mr. Neitzel has authored, published, and presented numerous technical papers and magazine articles on electrical safety, maintenance, and training. 

 

 


Select a Webinar Format:

Sorry... No formats avaiable to order at this time. Live session registrations ended at January 22, 2014 at 12:00 PM EST, and there are no archived versions available yet. Please check back in a few days to order the archived session.